Catenary Poles (Set of 12)

This is a set of 12 catenary poles. There are 5 poles without the secondary half support pole, primarily for bridges, although they can be used on the ground as well. Each catenary features a built-in hole for support cables from the pole to the extended catenary support, and from the pole to the ground. This was typical on Milwaukee RR trolley poles because of the weight and stress of the cantilever. These are intended to be used with the Catenary Track Gauge, and the Brdg. Catenary Support.

NOTE: Extra care should be taken not to force the pole at the Brdg. Catenary Support as these parts are a bit delicate. Also, I recommend you wash the parts with a light mix of dish detergent, rinse, and let dry before painting. This will save a lot of time building the catenary. Enjoy the model.